Diving mills-drilling tools,cutting tool

Diving mills-drilling tools,cutting tool

Diving mills

Seco provides the most comprehensive assembly of drilling tools. Removing a large amount of material in the shortest time is the most effective milling process. Because of its high material removal rate, it is ideal to reduce the cutting tool in 3d milling applications.

Large turbo – 2 tips, single – side insertion

In the direction of axial direction, such as in the deep hole of the tool, the turbocharger can be used for up-down replication and downward reproduction. All of the family’s knives contain internal coolant to optimize the chip’s evacuation.

Jump into the turbine – insert dimension 06

Cutting range: 12-18 mm

Cut the maximum radial depth of 3 mm. 118 inches)

Insert corner radius 0.2-1.6mm (. 008 -. 063 inches)

 

Large turbo – insert dimension 10

Cutter range: 20-50mm (. 75-2.50 inches)

Maximum radial depth cutting 6 mm (. 236 inches)

Insert Angle radius 0.4-3.1 mm (. 016 -. 122 inches)

 

Large turbo – insert size 12

Cutting range: 25-63 mm (1-2.50 inches)

The maximum radial depth of 7 mm. 275 inches)

Insert Angle radius 0.4-6.3 mm (. 016 -. 248 inches)

 

Large turbo – 2 tips, single – side insertion

In the direction of axial direction, such as in the deep hole of the tool, the turbocharger can be used for up-down replication and downward reproduction. All of the family’s knives contain internal coolant to optimize the chip’s evacuation.

6 – tip double – edge insertion

Cutting range: 40-100mm (1.5-4in)

The maximum radial depth of 7 mm. 275 inches)

Insert corner radius 0.8-1.6mm (. 031 -. 063 inches)

 

SCET12 insertion type plunges – four cutting-edge single-side inserts

Cutting range 32-160 mm (1.25-6 inches)

Cutting maximum radial depth: 1mm (. 433 inches)

20-40 mm diameter: 100-160 mm (. 787-1.5 inches)

Insert Angle radius 1.2-3.1 mm (. 047 -. 122 inches)

 

For AP16 insert – 2 – front, single – side insertion

Cutting range: 40-125 mm

Maximum radial depth 15mm (. 590 inches)

Insert corner radius 0.8-3.0mm (. 031 -. 118 inches)

Leave a Reply

Your email address will not be published. Required fields are marked *